 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD1963 Transistors Power transistor (50V, 3A) 2SD1963 Features 1) Low saturation voltage, typically VCE(sat) = -0.45V (Max.) at IC/IB = -1.5A / -0.15A. 2) Excellent DC current gain characteristics. 3) Complements the 2SB1308. External dimensions (Unit : mm) MPT3 4.5 1.6 0.5 1.5 (1) (2) (3) 1.0 2.5 4.0 0.4 0.4 1.5 0.5 1.5 3.0 0.4 (1)Base (2)Collector (3)Emitter Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Symbol VCBO VCEO VEBO IC Limits 50 20 6 3 5 0.5 2.0 150 -55 to 150 Unit V V V A(DC) A(Pulse) W W 1 2 Collector power dissipation Junction temperature Storage temperature PC Tj Tstg C C 1 Single pulse, Pw=10ms 2 When mounted on a 40x40x0.7mm ceramic board. Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Symbol BVCBO Min. 50 20 6 - - 180 - - - Typ. - - - - - - 0.25 150 35 Max. - - - 0.5 0.5 560 0.45 - - Unit V V V IC=50A IC= 1mA IE= 50A VCB=40V VEB=5V VCE=2V, IC=0.5A IC/IB=1.5A/ 0.15A VCE=6V, IE= -50mA, f=100MHz VCB=20V, IE=0A, f=1MHz Conditions Collector-emitter breakdown voltage BVCEO Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency BVEBO ICBO IEBO hFE VCE(sat) fT Cob A A - V MHz pF Output capacitance Measured using pulse current. Rev.A 1/2 2SD1963 Transistors Packaging specifications and hFE Type Package hFE Marking Code Basic ordering unit (pieces) Denotes hFE 2SD1963 MPT3 RS DG T100 1000 Electrical characteristic curves 10 5 VCE= -2V 5000 2000 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) VCE=2V 2 1 0.5 lC/lB=40 COLLECTOR CURRENT : IC (A) Ta=100C 25C -25C DC CURRENT GAIN : hFE 2 1 0.5 0.2 0.1 0.05 0.02 0.01 5m 2m 1m 0 1000 500 200 100 50 20 10 Ta=100C Ta= -25C Ta= 25C Ta=100C 25C -25C 0.2 0.1 0.05 0.02 0.01 2m 5m 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 5 1m 2m 5m 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.1 Grounded emitter propagation characteristics Fig.2 DC current gain vs. collector current Fig.3 Collector-emitter saturation voltage vs. collector current Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SD1963
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |